FAQs

  • CLIX works with the power of MAGNETS!

    CLIX will attach to any set of glasses. Apply the small magnets in your CLIX kit to the inside arms of your glasses. Slide the heat shrink tubing over top the magnets, and shrink the tubing down to keep the square magnets in place.

    Inside the sweat band of your hat, you’ll take the provided upholstery nail in your CLIX kit and pop it through your sweat band, you’ll then place the round anchor magnet through the nail, and cover the nail with the rubber stopper to keep everything in place.

  • This means a magnet, whether in your hat or your glasses, is facing the incorrect way. Typically, the square glasses magnet is facing the wrong direction.

  • We recommend removing the magnets from your hat before washing your hat.

  • Once you install the magnets and tubing onto your glasses, that’s where they stay. You can purchase additional sleeves for your glasses on our product page.

    The hat magnets can be moved from hat to hat, we have a “Hat Lovers Bundle” on our product page that will give you 3 hat set up’s and 1 set up for your glasses. Or you can purchase additional hat anchors on their own on our product page.

  • YES - Patent Pending!

    CLIX received its patent PENDING status as of January 2024.

  • Reposition the sleeves and apply heat to the tubing again, similar to the heat you used during the install.

  • Magnets do loose their strength over time, so it might be time to replace them.

  • The glasses are not placed as far back as they could be. Adjusting the anchors (round magnets in the hat) would be the easiest fix, by simply moving the nail back further into the sweat band. Be sure to adjust both anchors if needed.